A set of 3 polystyrene sheets 150×150mm x 1mm, 2mm, 3mm along with a 150×150×3mm clear acrylic sheet for use
Bimorph Sensor Plates
The set comprises three plates 100mm square with piezo-electric, sensors bonded to the surface connected to by flying leads.
A rectangular glass tank measuring 30cm long by 10cm wide has a diagonal dividing partition so that an absorbing “wedge”
A mounted, light sensitive phototransistor for use in a variety of situations. The device can be incorporated into electronic sensor
A mounted, light sensitive photodiode for use where less sensitivity than the phototransistor is required. It can be incorporated into
For use with any Low Voltage d.c. Power Supply to reduce ripple to better than 3%. Max Current 6A (8A
Combination Switch Panel
This self-contained unit, in robust white acrylic, provides the four switches, test button and indicator required for deducing the switch
Trans-ratio is a fully self-contained transformer system which enables students to investigate turns ratios and efficiency with minimum of complication.
PI/O Input Output Board
The Lascells PI/O board is designed to connect to the Raspberry Pi computer and allows access to the GPIO pins.
AC Waveform Demo
A unique teaching aid for the concept of alternating current. When a 12V d.c. supply is connected to the